Categories
Popular Products
T360B336 T400B336 T460B336 Speed Precision Lathe
  • T360B336 T400B336 T460B336 Speed Precision Lathe
  • T360B336 T400B336 T460B336 Speed Precision Lathe

T360B336 T400B336 T460B336 Speed Precision Lathe

1. The surface of bed ways is supersonic frequency hardened and precision ground;
2. The design of the main turning lathe drive is optimized and the gears in the headstock are Hardened and precision ground.
  • T360B336 T400B336 T460B336 Speed Precision Manual Turning LatheDownload
  • T360B336 T400B336 T460B336 Torno de torneado manual de precisi√≥n de velocidadDownload
INQUIRY
Features 
1. The surface of bed ways is supersonic frequency hardened and precision ground;
2. The design of the main turning lathe drive is optimized and the gears in the headstock are Hardened and precision ground.The noise of the machine is low. Permanently lubricated main, feed and apron gear;
3. Lathe big spindle bore size is Φ80mm.The spindle system is high in rigidity and accuracy;
5. There is no vibration when turning with a heavy cutting depth of 10mm;
6. There is no need for change gears. Manual Turning Lathe can turn about 200 kinds of metric, whitworth, module and D. P. Threads including special whitworth threads such as 7-1/2, 9-1/2,10-1/2, 11, 11-1/2, 13, 13-1/2,19,27t.p.i .and pipe threads;
7. An automatic stopping device is used to realize automatic stop for the machining of a certain length workpiece, which is safe and reliable; Central lubrication for carriage;
8. A braking device stops the lathe machine quickly and effectively;
9. Spindle jog control, right and left hand operation chosen by the client;
 
Technical specifications
Model T360B336 T400B336 T460B336
Max. length of workpiece 1500mm (60'') 1000mm (40'') 1500mm (60'') 1000mm (40'') 2000mm (80") 1500mm (60'') 1000mm (40'')
Capacity Max. swing over bed Φ360mm(14”) Φ410mm(16”) Φ460mm (18”)
Max. swing over carriage Φ200mm(7-2/3”) Φ250mm(10”) Φ290mm (10-4/5”)
Max. swingin gap Φ600mm(23-5/8”) Φ660mm(26”) Φ700mm (27-1/2”)
Effective gap length 200mm (8") 200mm (8") 200mm (8")
Bed width 336mm (13'') 336mm (13'') 336mm (13'')
Spindle Spindle bore Φ80mm (3-1/8”) Φ80mm (3-1/8”) Φ80mm (3-1/8”)
Taper of bore MT-7 MT-7 MT-7
Spindle port: Camlock D1-8 D1-8 D1-8
Number of speed 12 steps 12 steps 12 steps
Range of speed 42-1800rpm 42-1800rpm or 25-1800rpm 42-1800rpm or 25-1800rpm
Thread cutting Metric Range/No 0.5~20mm /24 0.5~20mm /24 0.5~20mm /24
Whitworth Range/No 72~15/8TPI /61 72~15/8TPI /61 72~15/8TPI /61
D.P. Range/No 96~31/4DP /45 96~31/4DP /45 96~31/4DP /45
Module Range/No 0.25~10MP /20 0.25~10MP /20 0.25~10MP /20
Range of feeds Longitudinal 0.04~2.46mm/r (0.0015”~0.0913”/r) 0.04~2.46mm/r (0.0015”~0.0913”/r) 0.04~2.46mm/r (0.0015”~0.0913”/r)
Cross 0.03~1.23mm/r (0.001”~0.0365”/r) 0.03~1.23mm/r (0.001”~0.0365”/r) 0.03~1.23mm/r (0.001”~0.0365”/r)
Tailstock sleeve External diameter Φ75mm (3”) Φ75mm (3”) Φ75mm (3”)
Taper of bore MT-4 MT-4 MT-5
Max. traverse 130mm (5”) 130mm (5”) 130mm (5”)
Tools Max travel of compound rest 100mm (4”) 100mm (4”) 100mm (4”)
Max travel of cross slide 280mm (11”) 280mm (11”) 280mm (11”)
Max tool size (W x H) 25x25mm (1''x1'') 25x25mm (1''x1'') 25x25mm (1''x1'')
Main motor power (double speeds) 5.5kW / 7.5Hp 5.5kW / 7.5Hp 5.5kW / 7.5Hp
Overall dimensions (L x W x H) 2810/2310x1000x1255mm
(111''/91''x39''x49'')
2810/2310x1000x1275mm
(111''/91''x39''x50'')
3320/2810/2310x1100x1295mm
(131''/111''/91''x43''x51'')
Net weight (kg) 2550kg 2250kg 2600kg 2300kg 2900kg 2650kg 2350kg
                   
Manual Turning Lathe can be user selectable available
Metric leadscrew, Whitworth leadscrew, left or right wheel ,all kinds of voltage and frequency of main motor;

Turning is a machining process used to make cylindrical parts, where the cutting tool moves in a linear fashion while the workpiece rotates. 
The Centre Lathe is used to manufacture cylindrical shapes from a range of materials including; steels and plastics. Many of the components that go together to make an engine work have been manufactured using lathes. These may be lathes operated directly by people (manual lathes)  that have been programmed to carry out a particular task. A basic manual centre lathe is shown below. This type of lathe is controlled by a person turning the various handles on the top slide and cross slide in order to make a product / part.
The headstock of a centre lathe can be opened, revealing an arrangement of gears. These gears are sometimes replaced to alter the speed of rotation of the chuck. The lathe must be switched off before opening, although the motor should automatically cut off if the door is opened while the machine is running (a safety feature).
The speed of rotation of the chuck is usually set by using the gear levers. These are usually on top of the headstock or along the front and allow for a wide range of speeds.

However, sometimes the only way to set the lathe to a particular speed is to change the gear arrangement inside the headstock. Most machines will have a number of alterative gear wheels for this purpose.
Equipments
1. 3-Jaw Φ250mm (10”) Chuck;      2. 4-Jaw Φ300mm (12”) Chuck;     
3. Steady Rest;                                4. Follow Rest;
5. Face Plate;                                  6. Coolant System;                
7. Work Light;                                  8. Tool box;
Optionals
1. Taper turning attachment;        2. Leadscrew Guard, Chuck Guard; 
3. Quick change tool post;         4. 2-Axis or 3-Axis DRO;
Applications 
Speed Precision Manual Turning Lathe machine tool is ideal for machining internal, external and cylindrical surfaces as well as other rotary surfaces. T360B336 T400B336 T460B336 Speed Precision Manual Turning Lathe is suitable for cutting various metric, Whitworth threads; and conventional turning, facing, drilling, reaming and broaching are also available.
Contact Us
FORTUNE PACIFIC LIMITED
0538-6918256
TaiAn, Shandong Province, China
Download